Parts For Maintenance And Repair; Replacement Interval For Parts With A Limited Life - Samsung CLP-600 Series Service Manual

5.2 Parts for Maintenance and Repair

5.2.1 Replacement interval for parts with a limited life

Some of the parts in this printer have a limited life, shorter than that of the whole machine. These parts
must be replaced periodically.
The table below shows the interval at which these parts should be replaced.
The table shows the life of each part, and is measured when using A4 paper. When servicing a machine
always check the status of these parts using the control panel and ensure that parts are replaced at the
appropriate times otherwise a general degradation in print quality will occur.
COMPONENT
Toner Cartridge (C/M/Y/K)
PTB Unit(Paper transfer belt)
Pick-Up Roller
Fuser Unit
The life span of each of these parts is stored in memory. The amount of each 'life' used can be checked at
any time using the control panel.
When a part is replaced it is necessary to reset the 'life used' that is stored in memory.
* How to initialize a the value of part's life span:
From the control panel, select the following items in order:
Menu-Setup - Maintenance - Check other - (Select a desired part) - Reset
Samsung Electronics
REPLACEMENT CYCLE
intial (2,000 pages@5% coverage)
replacement (4,000 pages@5% coverage)
Black/Color : (35,000 pages@5% coverage)
50,000 pages
- MP Pick-Up Roller,
- Cassette Tray1 Pick-Up Roller
- SCF Tray2 Pick-Up Roller
50,000 pages
Disassembly and Reassembly
REMARK
User replace
User replace
Engineer
User replace
Service Manual
5-3