Jam 0 In Mp Tray - Samsung CLP-600 Series Service Manual

Alignment and Adjustmens

6.2.4 Jam 0 In MP Tray

When you print using the Multi-purpose Tray and the printer detects that there is either no paper or the
paper has been improperly loaded, a lamp turns on at the corresponding location on the Status map. If you
use the CLP-600N, "Jam0 In MP Tray" also appears on the display.
1. If the paper is not feeding properly, using the
handle, completely open the access door.
2. Remove the jammed paper by pulling in the
direction shown. To avoid tearing the paper, pull
it out gently and slowly.
Service Manual
6-6
CAUTION:
• Do not touch the green surface, the OPC drum,
on the front of each toner cartridge with your
hands or any other material. Use the handle on
each cartridge in order to avoid touching this
area.
• Be careful not to scratch the surface of the paper
transfer belt.
• f you leave the access door open for more than
a few minutes, the OPC drum can be exposed to
light. This will cause damage to the OPC drum.
Close the access door should the installation
need to be halted for any reason.
3. Close the access door firmly. The printer will
resume printing.
CAUTION:
If the access door is not completely closed, the
printer will not operate.
Samsung Electronics