Toyota FJ CRUISER 2010 Quick Reference Manual page 429

6-1. Specifications
Tire related term
Weather side
Bead
Bead separation
Bias ply tire
Carcass
Chunking
Cord
Cord separation
Cracking
CT
Extra load tire
Groove
Innerliner
408
The surface area of the rim not covered by the
inflated tire
The part of the tire that is made of steel wires,
wrapped or reinforced by ply cords and that is
shaped to fit the rim
A breakdown of the bond between components
in the bead
A pneumatic tire in which the ply cords that
extend to the beads are laid at alternate angles
substantially less than 90 degrees to the
centerline of the tread
The tire structure, except tread and sidewall
rubber which, when inflated, bears the load
The breaking away of pieces of the tread or
sidewall
The strands forming the plies in the tire
The parting of cords from adjacent rubber
compounds
Any parting within the tread, sidewall, or
innerliner of the tire extending to cord material
A pneumatic tire with an inverted flange tire
and rim system in which the rim is designed
with rim flanges pointed radially inward and the
tire is designed to fit on the underside of the
rim in a manner that encloses the rim flanges
inside the air cavity of the tire
A tire designed to operate at higher loads and
at higher inflation pressures than the
corresponding standard tire
The space between two adjacent tread ribs
The layer(s) forming the inside surface of a
tubeless tire that contains the inflating medium
within the tire
I n f o r ma t i o n P r o v i d e d b y :
Meaning