Toyota FJ CRUISER 2010 Quick Reference Manual page 393

Hide thumbs Also See for FJ CRUISER 2010:

Table of Contents

Installing the tire

Install the tire and loosely tighten each wheel nut by hand by

approximately the same amount.

Replacing a steel wheel

Replacing an aluminum wheel

Tapered portion

I n f o r ma t i o n P r o v i d e d b y :

5-2. Steps to take in an emergency

Remove any dirt or foreign mat-

ter from the wheel contact sur-

If foreign matter is on the wheel

contact surface, the wheel nuts

may loosen while the vehicle is

in motion, and the tire may

come off the vehicle.

Tighten the nuts until the tapered

portion comes into loose contact

with the disc wheel sheet.

Tighten the nuts until the washer

of the nut comes into loose con-

tact with the disc wheel.