4-3. Do-it-yourself maintenance
■
Cleaning method
■
Replacement method
320
Remove the filter case.
If the filter is dirty, clean by
blowing
through the filter from the
downward side.
Hold the air gun 2 in. (5 cm)
from the filter and blow for
approximately 2 minutes at
72 psi (500 kPa, 5.0 kgf/cm
or bar).
If it is not available, have
the filter cleaned by your
Toyota dealer.
Remove the air conditioning
filter and replace it with a new
one.
The "↑UP" marks shown on the
filter should be pointing up.
I n f o r ma t i o n P r o v i d e d b y :
compressed
air
2