Updating The Base Station Firmware; Making Voip Settings; Using The Connection Wizard; Changing Settings Without The Connection Wizard - Gigaset C450 IP User Manual

Making VoIP settings

Updating the base station
firmware
If necessary, you can update your base sta-
tion firmware.
The firmware update is downloaded by
default directly from the Internet. The rel-
evant website is preconfigured in your
phone.
Note:
For the following firmware updates, you can
use the Web configurator to specify a local PC
from which the firmware should be down-
loaded to the phone (page 50).
Precondition:
The base station is in idle status, i.e.:
u
No calls are being made via the fixed
network or VoIP.
u
There is no connection between regis-
tered handsets or to GHC devices.
u
The phone's Web configurator is not
connected to a PC.
u
The base station menu is not open in
any of the handsets.
Starting firmware update
¢ ¢
Settings
§Menu§
Update
~
Enter base station system PIN
(default setting: 0000).
The base station establishes a connection
to the Internet or to the local PC.
Press the display key to start
§Yes§
the firmware update.
Notes:
– If the update is carried out from the Inter-
net, a check is made to ensure that there is
not a more recent version of the firmware
available. If this is not the case, the opera-
tion is terminated and a message is issued
to that effect.
– If an error occurs while firmware is being
updated from a local PC, the most recent
version of the firmware is automatically
downloaded from the Internet.
38
¢
Base Firmware
Making VoIP settings
In order to be able to use VoIP, you must
set a few parameters for your base station.
You can set all parameters easily via a PC
connected to your network (see page 42).

Using the connection wizard

The connection wizard starts automati-
cally the first time your handset and base
station are used. You can also start the
connection wizard via the menu:
¢ ¢
Settings
§Menu§
(enter system PIN)
Configuration
¢
Connection Assistant
For how to enter VoIP settings using the
connection wizard, see page 10.
Changing settings without the
connection wizard
You can change your provider's VoIP set-
tings and the VoIP user data via the menu
without starting the connection wizard.
Downloading your VoIP provider's
settings
The general settings for various VoIP pro-
viders are available for download on the
Internet. The relevant website is precon-
figured in your phone.
¢ ¢
Settings
§Menu§
Configuration (enter system PIN)
¢
Select VoIP Provider
The phone establishes a con-
nection to the Internet.
q
Select country and press
q
Select VoIP provider and press
.
§OK§
Your VoIP provider data is downloaded
and saved in your phone.
¢
Base VoIP
¢
Base VoIP
§OK§
.