Main-Beam Headlights; Flashing; Direction Indicators - Alfa Romeo 156 GTA Owner's Manual

Main-beam headlights (fig. 67)
When the knurled ring is in the 2 posi-
tion, the headlights can be changed from
dipped-beam to main-beam by pushing the
lever towards the dashboard (stable posi-
tion). The 1 warning light will come on
on the instrument panel.
To return from main-beam to dipped-beam,
once again pull the lever towards the steer-
ing wheel and then release.
Flashing (fig. 68)
The headlights are flashed by pulling the
lever towards the steering wheel (unstable po-
sition) regardless of the position of the knurled
ring. The 1 warning light on the instrument
panel will come on at the same time.
IMPORTANT Only the main-beam lights
are flashed. To avoid penalties, follow local
regulations.
48
fig. 67

Direction indicators

(fig. 69)
Moving the lever to the stable position will:
up - engage the right-hand direction indi-
cators.
down - engage the left-hand direction in-
dicators.
One of the warning lights (R or E) will
come on on the instrument panel at the
same time.
The lever is returned to its home position
automatically and the indicators are
switched off when the steering wheel is
straightened.
A0B0374m
fig. 68
IMPORTANT If you wish to signal a
rapid change of direction involving only a
minimum movement of the steering wheel,
the lever can be moved up or down without
clicking (unstable position). When released
the lever will return to its home position.
A0B0375m
fig. 69
A0B0376m