SEATS
FRONT SEATS (fig. 4)
WARNING
Adjustments may be made
solely with the car sta-
tionary.
Moving the seat backwards
or forwards
Lift lever (A) and push the seat backwards
or forwards. Once you have let go of the
lever, check that the seat is firmly locked
in the runners by trying to move it back and
forth.
If the seat is not locked properly, in the
case of collision it might move unexpect-
edly with clearly dangerous consequences.
Electric adjusting seat inclination
This can be done pressing the button (B)
until the desired position is reached.
fig. 4
Adjusting the height of the
driver's seat
To raise the seat, pull the lever (C) tak-
ing it upwards, then continue operating the
lever (up and down) until reaching the re-
quired height.
To lower the seat, push the lever (C)
downwards, then operate the lever (up and
down) until reaching the height required.
WARNING Adjustment must only be car-
A0B0459m
ried out when seated in the driver's seat.
Lumbar adjustment
of the driver's seat
(for versions/markets where applicable)
Adjustment is done by turning the knob
(D) until reaching the most comfortable po-
sition.
301