Inflating Procedure - Alfa Romeo 156 GTA Owner's Manual

WARNING
Warning! The bottle (C-fig.
11) contains propylene gly-
col. This substance is toxic: do not
swallow it and avoid contact with
the eyes, the skin and the clothes.
In case of contact, rinse with abun-
dant water. If any allergy reaction
should take place call a medical doc-
tor. Keep the bottle in the appro-
priate compartment away from
heat and children.
180
IT IS NECESSARY
TO KNOW THAT:
WARNING
Do not operate the com-
pressor for more than 20
minutes: risk of overheating!
The sealer included in the quick repairing
kit, good for temperatures between –30°C
and +80°C, is not adequate for permanent
fixing.
The liquid inside the tyre can be easily re-
moved with water.
The sealer has no expire date.

INFLATING PROCEDURE

(fig. 13-14-15-16-17-18-19)
– Place the wheel in the position illustrated
in the figure (A) for the operation with the
valve, then engage the handbrake.
– Screw the filling pipe (B) to the bottle
(C).
– Unscrew the tyre valve plug, remove the
element inside the valve by using the ap-
propriate tool (D); be careful not to place it
on the sand or on a dirty surface.
– Introduce the filling pipe (B) in the tyre
valve, keep the bottle (C) with the pipe di-
rected downwards, then press the bottle so
that the whole sealer can get into the tyre.
fig. 13
A0B0422m