Fog Lights; Front Light Cluster With Main Beam/Dipped Beam Xenon Gas Discharge Headlights; Driving Tips; Tyre Repair Kit - Alfa Romeo GIULIA Quick Manual

FOG LIGHTS

(A) fig. 25: fog light access cover.
25
26
FRONT LIGHT CLUSTER WITH MAIN
BEAM/DIPPED BEAM XENON GAS
DISCHARGE HEADLIGHTS
To replace the bulbs of the main beam
headlights/dipped headlights contact an
Alfa Romeo Dealership.
27) Before replacing the bulb, wait for the
exhaust ducts to cool down: DANGER OF
SCALDING!
28) Modifications or repairs to the
electrical system that are not carried out
properly or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
29) Halogen bulbs contain pressurised gas,
in the case of breakage they may burst
causing glass fragments to be projected
08026S0031EM outwards.
30) Only replace the light bulbs when the
engine is off and in a position that does not
interfere with traffic and lets you safely
replace them. Also ensure that the engine is
cold, to prevent the risk of burns.
2) Halogen bulbs must be handled holding
the metallic part only. Touching the
transparent part of the bulb with your
08026S0101EM
fingers may reduce the intensity of the
emitted light and even reduce the lifespan of
the bulb. In the event of accidental contact,
wipe the bulb with a cloth moistened with
alcohol and let the bulb dry.
ATTENTION
WARNING

DRIVING TIPS

In daily use, the consumption of an electric
car may depend on the following factors,
which can have a considerable impact:
 car maintenance;
 tyre pressure;
 unnecessary loads;
 roof rack/ski rack;
 electric devices;
 climate control system use;
 devices for aerodynamic control.

TYRE REPAIR KIT

(where provided)

INFLATION PROCEDURE

31) 32) 33) 34) 35) 36) 37) 38) 39) 40)
3) 4)
1)
Proceed as follows:
 stop the car in a position that is not
dangerous for oncoming traffic where you
can change the wheel safely. The car must
be stopped in a lay-by, car-park or parking
or service area, and the ground must be as
level as possible and sufficiently compact.
 Stop engine, apply the electric parking
brake and set the gear lever to the "P"
(Park) position.
19