JVC TK-C553 Instructions Manual page 18

INSTALLATION
Ceiling Installation (Continued)
4.
(2) Position alignment mark
(2)
Rotate the
camera body
clockwise
18
(1)
Camera clamping
screw
(2) Camera position
alignment mark
Clamp
(3)
Camera
clamping screw
Camera
clamping screw
(4)
Tighten the camera
clamping screw.
4.
Mount the camera body.
1) Ensure that the camera clamping
screw on the ceiling mount is
loosened.
2) Align the camera position alignment
mark on the camera body with the
camera position alignment mark on
the ceiling mount and press the
camera body straight against the
mount.
Note
Exercise caution when mounting so as not
to pinch the drop prevention wire and the
connected cables.
3) Rotate the camera body clockwise as
far as it will go.
At this point, check that the camera
body clamp is located on the lock
screw on the ceiling mount.
4) Tighten the camera clamping screw.
CAUTION
Be sure to tighten the camera clamping
screw fully. Otherwise the camera body
may vibrate or drop from the ceiling.
To dismount the camera from the ceiling,
2.
perform steps to
4.
in reverse order.