Sym GTS 250 Service Manual page 45

To this chapter contents
3. Lubrication System
Tighten the oil pump screw.
1 screw
Roller
Oil Pump Installation
Install the oil pump, and then tighten screws.
Torque value¡ G 0.1~0.3kgf-m
Make sure that oil pump shaft can be rotated
freely.
2 screws
Install oil pump drive chain and sprocket, and
Clip
then install cir clip onto oil pump shaft.
Install starting gear and generator.
(Refer to chapter 10)
3-6