Jpeg Viewer Settings - JVC LST0886-001A Instructions Manual

Operation
Operation of Built-in Viewer
(continued)

JPEG Viewer Settings

(TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only.
Using the compressed JPEG format enables display of a series of still images as well as one-shot recording
of still images.
When the JPEG Viewer is first installed, it is set to play back at 15 fps (TV) or 5 fps (TX) by default.
● When a different menu is currently being displayed, click [Viewer Setup] to switch the menu.
● Click the menu bar on the left side of the screen to open the respective setting screens.
● Click the [Apply] button to activate the settings in the Viewer. The settings will be saved on the
computer.
On Screen Display
Settings
A
B
C
D
E
On Screen Display
Settings
A
Camera ID
B
Position Title
(TX)
C
Disp MD
D
Time
E
Format
74
Stream
Click
A
B
C
D
E
For setting display items on the viewer screen.
For the JPEG Viewer, characters are displayed as overlay on the video image.
Select AOnB to display [Camera ID].
[Camera ID] can be specified on the[Basic Settings2] or [Camera] page of the
camera. (A Page 21)
Selecting AOnB displays the position title.
When AOnB is selected, the frame of the video image display area where motion
is detected turns red.
Select AOnB to display the time.
This indicates the time that is stored in the JPEG data.
Select the format for displaying time.
YYYY, MM, and DD denote year, month and day respectively, while HH,
MM, and SS denote hour, minute and second respectively. mm is
equivalent to 1/100 seconds.
Other
Click
A
Click