Setting Using Internet Explorer
Setting (continued)
Basic Settings2
Page for setting fundamental parameters of ACameraB, AJPEGB and AMPEG4B.
This page can be used during access using AadminB or AoperatorB.
● Click [Basic Settings2].
● Press the [OK] button to enable the new settings.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Click
Memo:
● You can open the [Basic Settings2] screen without going through the built-in viewer by entering the
following URL address (
● Enter the model name in lowercase letters.
VN- V225U series is displayed :
(Example)
http://192.168.0.2/cgi-bin/ v225 display.cgi? v225 basicmenu2.html
18
contains model name) in the address field of Internet Explorer.
A
B
C
D
E