Table of Contents
Advertisement
Installation and connection
Mounting the Camera
(continued)
When mounting the camera to the
electrical box
NOTE:
Before mounting the camera to electrical boxes,
please refer to local building codes for box type to
use for low-voltage wiring.
Connecting
1.
Align j with the shooting direction when
mounting the cover to the electrical box.
Align with shooting direction
2.
Follow steps 2 to 7 of When mounting the
camera directly to the ceiling or on the wall
(
Connecting) (A pg. 20).
Mounting
1.
Attach the camera to the outer case that
has been fastened to the electrical box.
Follow steps 1 to 3 of When mounting the
camera directly to the ceiling or on the wall
(
Mounting) (A pg. 21)
Adjusting Images
After mounting is completed, adjust the
images while checking the actual image.
(A pg. 23 Adjusting Images )
22
Mount by allowing the cable to exit from
the side
When mounting the camera to the ceiling or a
wall, it is possible to guide the cable from the side
without opening any holes.
The basic mounting method is identical to steps
in When mounting the camera directly to the
ceiling or on the wall (A pg. 20).
1.
2.
3.
Outer case
mounting screws
Less than 4 mm
4.
Break the cable extraction hole using a
pair of long-nose pliers
Pull out the cable from the extraction hole
and mount it to the ceiling or wall
Connecting the cable
Follow steps 4 to 7 of When mounting the
camera directly to the ceiling or on the wall
(
Connecting) (A pg. 21)
Cable
Adjusting Images
After mounting is completed, adjust the
images while checking the actual image.
(A pg. 23 Adjusting Images )
Advertisement
Table of Contents
