Adjusting The Thread Tension; Adjusting The Hook Thread Tension - DURKOPP ADLER 887 Instruction Manual

6.4

Adjusting the thread tension

6.4.1

Adjusting the hook thread tension

3
Caution! Risk of injury!
Turn off the main switch.
The hook thread tension may only be adjusted with the machine
switched off.
–
Adjust the hook thread tension by the screw (1) with a screwdriver.
The tension is increased by tightening the screw.
–
Measure the thread tension with a dynamometer. Thread the
thread according to the picture and pull in the arrow direction (3).
This tension is adjusted in the factory in dependence on the
selected sewing equipment according to the below table, and it is
suitable for the usual sewing operations. For sewing thin soft
materials, it is necessary to reduce the tension. If the seam is to be
tightened strongly, it is necessary to increase the tension and
reduce the sewing speed at the same time.
Hook thread tension mean value
Sewing category
light
medium
heavy
1
Needle used
thread Nadelstärke Nm
70-80
90-110
120-160
Tension in
grams
50
65
90
11
GB