Using The System; Playing Music With The Soundtouch™ Controller; Using The Soundtouch™ Controller - Bose Soundtouch Stereo JC Owner's Manual

Playing music with the SoundTouch™ controller
During the setup process, you were prompted to connect the SoundTouch
controller to the system. If your SoundTouch
the SoundTouch
™
system, and click CONNECT SOUNDTOUCH CONTROLLER.
You can use the SoundTouch
Note: The SoundTouch
SoundTouch
In concrete, stucco or brick homes, the range will likely be less and
may vary. The number of other active wireless devices in the home
may affect range. Ideally, there should be no more than one wall or
ceiling between the controller and the wireless adapter.
SoundTouch
Skip backward
Using the SoundTouch™ controller
• Press a preset to play it. Press and hold a preset to personalize it.
• Move your finger around the Presets ring to view presets.
• Turn the Volume ring to adjust the volume.
• Touch or
• Press and hold the screen to turn the SoundTouch
• Press the screen to play or pause music.
• Touch and hold the SoundTouch
system. To connect to another system, refer to the help system in the app.
Note: If the controller is in power saving mode, wave your hand
within 6 in. (15 cm) above the screen to turn it on.
app and click EXPLORE > SETTINGS > Systems, select your
controller to play and manage your presets.
™
controller must be within 70 feet (21 m) of the
™
wireless adapter in wood-construction homes.
™
icon
™
Screen
to skip through content.
controller is not connected, launch
™
icon to disconnect the controller from a
™

Using the System

Presets ring
Skip forward
Volume ring
system on and off.
™
™
English - 19