Bose Soundtouch Stereo JC Owner's Manual page 23

3. Press and release ADAPTiQ on the Acoustimass
The system announces the selected language.
To select a different language, press ADAPTiQ repeatedly until you hear the
language you want.
4. Place the module in its final position and orientation (standing on its feet or
laying on its side). Make sure the opening at the front of the module faces into
the room.
5.
Click the screen on the SoundTouch
selected language.
6. Follow the audio prompts to complete the process.
During the process:
• If you get interrupted and are temporarily called away from the system,
you can return within ten minutes and continue. After ten minutes, the
system cancels the calibration process and returns to normal operation,
leaving your system unchanged.
• To cancel and leave your system unchanged, press and release the
ADAPTiQ button.
• To reset the system to factory settings, press and hold the ADAPTiQ
button until you hear a confirmation message.
Screen
SoundTouch ™ controller
module connector panel.
®
ADAPTiQ button
®
controller to continue in the
™
ADAPTiQ®
English - 23