Changing A Bulb; Horizontal Aim Adjustment - Ford 2015 TRANSIT CONNECT Owner's Manual

C 25 feet (7.6 meters)
D Horizontal reference line
Vertical Aim Adjustment Procedure
1. Park your vehicle on level ground
approximately 25 feet (7.6 meters)
from a wall or screen.
2. Measure the distance from the ground
to the center of the headlamp bulb and
mark an 8 foot (2.4 meter) long
horizontal reference line on the wall or
screen at this height.
Note: To see a clearer light pattern while
adjusting one headlamp, you may want to
block the light from the other headlamp.
3. Switch on the low beam headlamps
and open the hood.
E142465
4. On the wall or screen you will observe
a flat zone of high intensity light
located at the top of the beam pattern.
If the top edge of the flat zone of high
intensity light is not on the horizontal
reference line, adjust the aim of the
headlamp beam.
Transit Connect (CHC) Canada/United States of America, enUSA, First Printing
Maintenance
E164485
5. Locate the vertical adjuster on each
headlamp. Use a suitable tool, for
example a screwdriver or hexagonal
socket, to turn the adjuster clockwise
or counterclockwise to adjust the
vertical aim of the headlamp. The
horizontal edge of the brighter light
should touch the horizontal reference
line.
6. Close the hood and switch off the
lamps.

Horizontal Aim Adjustment

The horizontal aim of the headlamp beam
on your vehicle is not adjustable.

CHANGING A BULB

Switch the lamps and the ignition off.
Failure to do so could result in
serious personal injury.
197
WARNINGS