Ford 2015 TRANSIT CONNECT Owner's Manual page 212

Name
ZC-32-B2 (U.S.)
Motorcraft® Multi-Purpose Grease Spray
XL-5
Motorcraft® R-134a Refrigerant (U.S.)
YN-19 (U.S.)
Motorcraft® PAG Refrigerant Compressor Oil
YN-12-D
Premium Long-Life Grease
XG-1-E1
Penetrating and Lock Lubricant
XL-1
If you use oil and fluids that do not meet
the defined specification and viscosity
grade, this may lead to:
• Component damage which is not
covered by the vehicle warranty.
• Longer engine cranking periods.
• Increased emission levels.
• Reduced engine performance.
• Reduced fuel economy.
• Degraded brake performance.
Use of synthetic or synthetic blend motor
oil is not mandatory. Only use fluid that
meets Ford specifications. Motor oils of
the recommended viscosity grade that
meet API SN requirements and display the
API Certification Mark for gasoline engines
are also acceptable. Do not use oil labeled
with API SN service category unless the
label also displays the API certification
mark.
Transit Connect (CHC) Canada/United States of America, enUSA, First Printing
Maintenance
E142732
An oil that displays this symbol conforms
to current engine, emission system and
fuel economy performance standards of
the International Lubricant Standardization
and Approval Committee (ILSAC).
Do not use supplemental engine oil
additives because they are unnecessary
and could lead to engine damage that may
not be covered by your vehicle warranty.
Note: Ford recommends using DOT 4 Low
Viscosity (LV) High Performance Brake Fluid
or equivalent meeting WSS-M6C65-A2. Use
of any fluid other than the recommended
fluid may cause degraded brake
performance and not meet the Ford
performance standards. Keep brake fluid
clean and dry. Contamination with dirt,
water, petroleum products or other
materials may result in brake system
damage and possible failure.
209
Specification
ESB-M1C93-B
WSH-M17B19-A
WSH-M1C231-B
ESA-M1C75-B
-