Appendix D: New Zealand Addendum - DSC PowerSeries PC1404 V1.1 Installation Manual

Appendix D: New Zealand Addendum

The following are programming defaults for New Zealand that differ from the standard defaults in this manual:
2.2 AC Terminals (pg. 3)
For New Zealand, use the following plug-in Transformer: energy-efficient, input 230-240VAC/50Hz, output 16VAC 1.5A, 1.8m 2-wire out-
put lead; Tyco PN 88014330.
2.2 Telephone Line Wiring (pg. 4)
For New Zealand, wire the incoming and outgoing lines to the connection terminals of an appropriate, locally approved, telco connection
outlet.
Section Pg. Description
[001] 16 Zone 1-8 Definitions
[013] 18 First System Options
[168] 21 Set Clock Forward (Daylight Saving)
[169] 21 Set Clock Back (Standard Time)
[320] 22 Alarm Reporting Codes, Zones 01-08
[329] 23 Priority Alarm and Restore Reporting Codes Keypad [F], [A], and [P] Alarms, and Aux. Input Alarm
[341] 23 Miscellaneous Closing (Arming) Reporting
Codes
[350] 24 Communicator Format Options
[367] 25 Opening/Closing Communicator Call Direc-
tions
[377] 25 Communication Variables
[380] 25 First Communicator Options
[501] 27 PGM 1 Attributes
[501]-[514], 27 PGM Attributes
[551]-[564]
[701] 29 First International Options
Defaults
Option
Zones 5, 6, 7, 8
Option 6, Audible Exit Fault Enable
Month
Week
Month
Hour
Automatic Zone Bypass
Telephone# 1-4
Option 1, First Telephone Number
AC Failure Communication Delay
Test Transmission Cycle (land line)
Option 6, Alternating Backup Dial
Opt. 5 Code Req.
19 Command Output # 1 (*71), Opt. 5 Code Req.
Option 1, 50 Hz AC
Appendix D: New Zealand Addendum
New
Zealand
Default
03
OFF
009
005
004
003
11
11
FF
03
ON
010
001
ON
OFF
OFF
ON