To check if the installation of the software is completed
Display the launcher menu and press the HELP button on the Remote Commander.
If the multipoint mode icon appears in the Information menu, the MCU software is
installed correctly.
Multipoint mode icon
IP:012.345.678.912
LAN Mode 100 Mbps/Full
The installed software will be shown in "Software Option" of the Machine
Information menu.
For details on the Machine Information menu, see "Machine Information
Menu" on page 57.
Information
ISDN:0123456789012
Audio:MIC (INT)
OK
Preparing for a multipoint videoconference
151