Sony PCS-TL50 Operating Instructions Manual page 50

Port Number Used
Selects whether or not to fix the TCP port
number and UDP port number.
Custom: Uses the port numbers set by the
user.
Default: Uses the default port numbers,
2253 for the TCP port number and
49152 for the UDP port number.
TCP Port Number
When "Port Number Used" is set to
"Custom", enter the TCP port number.
The display shows usable port numbers.
UDP Port Number
When "Port Number Used" is set to
"Custom", enter the UDP port number.
The display shows usable port numbers.
For details on the port numbers used, see
"List of Port Numbers Used on the PCS-
TL50" on page 228.
Page 6/8
LAN Setup
Page: 6/8
TOS
IP Precedence
Low Delay
High Throughput
High Reliability
Minimum Cost
TOS
Selects how to define the TOS (Type of
Service) field.
Off: Does not define the TOS field.
IP Precedence: Defines the TOS field as IP
Precedence.
Diffserve: Defines the TOS field as
Diffserve.
IP Precedence*
Enter the IP Precedence value (0 – 7).
Low Delay*
Selects whether or not to specify the bit rate
of Low Delay for the TOS field.
On: Specifies the bit rate of Low Delay for
the TOS field.
50
Registering Local Information
IP Precedence
0
Off
Off
Off
Off
Save Cancel
Off: Does not specify the bit rate of Low
Delay for the TOS field.
High Throughput*
Selects whether or not to specify the bit rate
of High Throughput for the TOS field.
On: Specifies the bit rate of High
Throughput for the TOS field.
Off: Does not specify the bit rate of High
Throughput for the TOS field.
High Reliability*
Selects whether or not to specify the bit rate
of High Reliability for the TOS field.
On: Specifies the bit rate of High Reliability
for the TOS field.
Off: Does not specify the bit rate of High
Reliability for the TOS field.
Minimum Cost*
Selects whether or not to specify the bit rate
of Minimum Cost for the TOS field.
On: Specifies the bit rate of Minimum Cost
for the TOS field.
Off: Does not specify the bit rate of
Minimum Cost for the TOS field.
* These items are displayed only when "TOS"
is set to "IP Precedence".
Diffserve**
Enter the Diffserve value (0 – 64).
**This item is displayed only when "TOS" is
set to "Diffserve".
Page 7/8
LAN Setup
Page: 7/8
PPPoE
PPPoE User Name
PPPoE Password
Off
Save Cancel