Sony PCS-TL50 Operating Instructions Manual page 196

3
Press the V or v button on the right side of the system to adjust the picture
quality, then press the OK button.
4
Press the MENU button to exit the menu.
To reset to the default picture quality
Select "Reset", the lowest setting item, then press the OK button.
Notes
The picture quality menu will disappear when you do not operate it for more than about
10 seconds. The menu will also disappear in the following cases:
– when you press the MENU button
– when you switch the picture on the display using the VIDEO CONF or PC/VIDEO
button on the Remote Commander (The picture quality menu does not disappear
when you switch the videoconference picture.)
– when you adjust the volume
– when you change the wide mode
– when you change the display in PinP or PandP mode
Picture quality menu for videoconference
Setting item
Mode
Picture
Brightness
BackLight
196
Adjusting the Picture Quality on the Display
Quality
Mode Standard
Picture
Brightness
BackLight
Reset
PC Adjust: up:
Press v to
select "Vivid", "Standard" or "Pro"
"Vivid" for bluish tone, or "Pro" for reddish
tone.
decrease picture
contrast
darken the picture
darken the backlight
PC
068
050
100
Select:OK Exit:MENU
Press V to
increase picture
contrast
brighten the picture
brighten the backlight 0 to 100
Adjustment range
–
0 to 100
0 to 100