Panasonic KX-TA624 Installation Manual page 226

001
Conditions
Feature Reference
4-12 System Programming
4.2
System Speed Dialing Entry
• Each speed dialing number has a maximum of 32 digits. The valid
characters are 0 – 9,
SECRET and – (hyphen) buttons.
– To store a flash signal, press FLASH.
Note: The stored flash will only be effective during a call in
– To store a hyphen, press the "–" button.
– To store a pause, press PAUSE.
(Refer to Section 3 "Pause Insertion, Automatic".)
– To store a feature number to convert pulse signals to DTMF
signals, press the
(Refer to Section 3 "Pulse to Tone Conversion".)
– To prevent displaying all or part of a number, press INTERCOM
before and after the confidential parts of the number. (Refer to
Section 3 "Secret Dialing".)
• When storing an external number, include a line access code (9, 81 – 86)
before the number. When dialing, a pause will automatically be inserted
after the code.
• When storing an account code, enter the account code after the line
access code. Press
(Refer to Section 3 "Account Code Entry".)
• It is possible to store a number consisting of 33 digits or more by storing
it in two speed dialing numbers. The line access code should be stored in
the first speed dialing number.
• To access another speed dialing number in steps 3 through 6, press
SELECT and start with step 3.
• To display parts of the number which have scrolled off the display, press
or .
Section 3, Features
System Speed Dialing
System Programming
(contd.)
, and # keys, and the FLASH, PAUSE,
progress. (Refer to Section 3 "External Feature
Access".)
and # keys.
and then enter the account code.