Installing Additional Paper Feed Units - Toshiba e-studio287CS User Manual

Installing Additional Paper Feed Units

•

Installing Additional Paper Feed Units

Installing additional paper feed units will increase the amount of paper you can load. You can install a
maximum of three additional drawers. One drawer can hold 550 sheets of paper at 64 g/m
an extra tray to the standard drawer and the bypass tray, you can print up to 2300 pages continuously.
Memo
•
The additional trays are called "Drawer 2", "Drawer 3" and "Drawer 4".
Additional Drawer Unit
1
2
3
Paper Feed Unit: MY-1045
4
Note
•
Up to three drawer units can be added to the equipment
without the Inner Finisher. For the equipment with the
Inner Finisher, up to two drawer units including the spacer
can be added.
5
•
Place the spacer under the additional drawer unit.
CAUTION
•
To use the Additional Tray, always use the
Caster Unit, and make sure to attach the
anti-tip feet and joint parts.
6
1
Open the box and remove the
additional drawer. Remove the
cushioning and protective materials.
Spacer
Spacer: GR-1160
May cause injury!
Anti-tip Foot
Side (2)
Anti-tip Foot
Rear (2)
2
Turn OFF the power to the machine,
and remove the power cord and
cables.
Note
•
If you leave the power ON, you may damage the
machine.
& For details about how to turn OFF the machine, see
"Turning Power OFF"
- 32 -
. By adding
2
Caster Unit
Caster Unit: GR-1170
Anti-tip Foot Anti-tip Foot
Cover (2) (2)
Anti-tip Foot Screws (22)
Cover (2)
(P.51).