mode, in this mode the Blind Spot Monitor (BSM) will
show a visual alert in the outside mirrors as well as an
audible alert when the turn signal is on. When "Blind
Spot Alert Off" is selected the Blind Spot Monitor (BSM)
system is deactivated.
To make your selection, press and release the SELECT
button until a check-mark appears next to the feature
showing the system has been activated or the check-mark
is removed showing the system has been deactivated.
NOTE: If your vehicle has experienced any damage in
the area where the sensor is located, even if the fascia is
not damaged, the sensor may have become misaligned.
Take your vehicle to an authorized dealer to verify sensor
alignment. Having a sensor that is misaligned will result
in the BSM not operating to specification.
Calibrate Compass
Refer to "Compass Display" for more information.
UNDERSTANDING YOUR INSTRUMENT PANEL 351
Compass Variance
Refer to "Compass Display" for more information.
Turn Menu Off
Press and release SELECT to turn the menu off.
Uconnect 730N/430/430N CD/DVD/HDD/NAV — IF
EQUIPPED
Refer to your Uconnect
operating instructions.
Operating Instructions (Voice Command System)
— If Equipped
Refer to "Voice Command" for further details.
Operating Instructions (Uconnect Phone) — If
Equipped
Refer to "Uconnect Phone" for further details.
I n f o r m a t i o n P r o v i d e d b y :
user's manual for detailed
4