Basic Menu Operation; Basic Menu Operation (Cont.) - JVC DLA-M2000LU Operating Instructions Manual

Menu Operations

Basic Menu Operation

When the MENU button is pressed, the projector enters Video or PC menu mode by responding to the input signal being
received.
Video menu mode:
Enters this mode when video-device-related signals are
input from the following devices.
• Video devices connected to the VIDEO IN (Y/C and
VIDEO) terminals.
• A video device connected to the PC 2 terminals, which
outputs component signals (Y, B-Y, R-Y) or DTV-format
signals (Y, P , P ).
B R
PC menu mode:
Enters this mode when computer-related signals are input
from the following devices.
• A computer connected to the PC 1 terminal.
• A computer connected to the PC 2 terminal, which outputs
analog RGB, V, H/Cs signals.
1
Press the MENU button.
The main menu is displayed on the screen.
Remote control unit Projector
MENU MENU
2 Press the cursor button 5 or ∞ ∞ ∞ ∞ to
select an item in the main menu.
Remote control unit Projector
3 Press the cursor button 3 3 3 3 or the
ENTER button to enter the submenu.
The submenu corresponding to the item selected in step
2 is displayed on the screen.
* When you selected "Information" in step 2, no
submenu is available.
Remote control unit Projector
42
4 Press the cursor button 5 or ∞ ∞ ∞ ∞ to
select an item in the submenu.
When a "Language" has been selected in step 2, press
to set the language.
Remote control unit Projector
5 Press the cursor button 2 2 2 2 or 3 3 3 3 to set
or adjust the value.
Remote control unit
Projector
When an item which has the "ENTER" message has been
selected in step 4, press the ENTER button to move to the
next submenu.
• All reset (Refer to page 47)
• Position (Refer to page 49)
• Decoder (Refer to page 44)
• Keystone (Refer to page 52)
• Options 1 (Refer to page 52)
• Options 2 (Refer to page 52)
To exit the main menu:
• While the main menu is displayed, press the MENU button.
The main menu disappears and the original picture image
resumes.
To exit the submenu:
• While the submenu is displayed, press the ESCAPE
button.
The menu returns to the previous menu.
• To exit the menu mode directly, press the MENU button.
The submenu disappears and the original video image is
restored.

Basic Menu Operation (Cont.)

Basic Button Functions in the Menu Mode
Button Function
MENU Enters the main menu or exits the menu mode.
Cursor button 5/∞ Selects an item in the menu. Pressing ∞ or 5 will scroll the item in the menu.
Cursor button 2/3
Sets or adjusts the value.
PRESET If pressed while the keystone setting submenu is displayed, the value is set to "0".
ESCAPE Returns to the previous menu.
Used to enter the submenu from the main menu.
ENTER
Used to enter the next submenu if "ENTER" is displayed in the selected item.
Remote control unit
FREEZE OPERATE
HIDE
PRESET MENU
ESCAPE VIC SELECT
PC
+
5 ∞ 2 3
DIGITAL ZOOM KEYSTONE VIDEO
–
U T +
SHIFT ZOOM FOCUS
D W –
+ +
QUICK
SHUTER ALIGN. VOLUME
– –
RM-M2000 REMOTE CONTROL UNIT
Video menu mode
Video main menu
Menu
3
Image adj.
Brightness
Setting Contrast
Sharpness
Color temp.
Color
Options
Tint
Language
All reset
Information
5 ∞
PC menu mode
PC main menu
Menu
3
Image adj.
Brightness
Setting
Contrast
Sharpness
Color temp.
All reset
Options
Language
Information
5 ∞
Menu Operations
Projector
STAND BY
LAMP TEMP
OPERATE
HIDE
PC
KEYSTONE VOLUME
VIDEO
PRESET MENU
ESCAPE ENTER
5 ∞ 2 3
Video submenu
Image adj.
Brightness 12
Contrast 12
Sharpness 1
Color 12
Tint 12
All reset ENTER
5 ∞
2 3
PC submenu
Image adj.
Brightness 12
Contrast 12
Sharpness 1 2 3 4 5
All reset
ENTER
5 ∞
2 3
43