Roland GX-640/GX-500/GX-400/GX-300 Setup Manual page 31



Insert the Roland Software Package CD-ROM into the computer.
If the setup menu appears, go to the upper right and click the

Windows Vista/7: Hold "Windows button" and press "R" buttons.
Windows XP: From [Start] menu, click [Run].
The "Run" screen appears.

In this illustration, drive D is speci-
fied as the Disk drive.
The Setup program starts and the [Driver Setup] window appears.


If Windows 7 is used, uninstall the driver pro-
gram.
If Windows XP/Vista is used, go on to the step
From [Start] menu, click [Control Panel], and
then click [Uninstall a program].
The window shown at left appears.
Click "Roland CAMM-1 DRIVER [Model
name]."
When the window shown at left appears, click
[Yes].
For [Open], type in the information shown below,
then click [OK].
Windows 7 32 bit edition
(Disk drive letter): ¥Drivers¥WIN7X86¥SETUP.EXE
Windows 7 64 bit edition
(Disk drive letter):¥Drivers¥WIN7X64¥SETUP64.EXE
Windows Vista 32 bit edition
(Disk drive letter):¥Drivers¥WINVISTAX86¥SETUP.EXE
Windows Vista 64 bit edition
(Disk drive letter):¥Drivers¥WINVISTAX64¥SET64UP.EXE
Windows XP 32 bit edition
(Disk drive letter):¥Drivers¥WINXPX86¥SETUP.EXE
Windows XP 64 bit edition
(Disk drive letter):¥Drivers¥WINXPX64¥SETUP64.EXE
Choose [Uninstall].
Select the model name you're using.
Click [Start].
Click [Yes] to restart the computer.
2-2 If You're Using a Windows

to close it.
.
29