About The Documentation For This Machine; Documentation Included With The Machine - Roland GX-640/GX-500/GX-400/GX-300 Setup Manual

About the Documentation for This Machine

Documentation Included with the Machine

CAMM-1PRO Setup Guide (This document)
This describes how to install and set up the machine and the included software.
CAMM-1PRO User's Manual
This describes how to use and care for the machine, and explains what to do if a problem occurs.
PNS-642/502/402/302 Assembly Instructions (shipped with the stand)
This document describes the assembly and installation of the special stand. It is included with the stand.
Printing and Cutting Guide(electronic-format manual)
This describes how to use the included software to perform printing and cutting (that is, how to print images
on a printer and cut their contour lines on this machine).
 "User's Manual"
Plug-in Setup Guide(electronic-format manual)
This describes how to set up the CutStudio plug-in and the basic usage of the plug-in.
 "User's Manual"
Macintosh Cutting Guide(electronic-format manual)
This describes such matters as how to carry out cutting using this machine with a Macintosh.
 P.30, " If You're Using a Macintosh"
For detailed information about the include programs and other software, refer to the following page.
 P.24, "About the Included Software"
15