Center-To-Center Distance Of The Upper Looper Holder; Caution In Assembly; Application Of Sealant - JUKI MO-6700D Series Manual

(3) Center-to-center distance of the upper looper holder

The center-to-center distance of upper looper holder 1.
H

(4) Caution in assembly

1) Application of sealant

1
Setscrew of the throat plate base (B) retainer
Apply the sealant only to the right setscrew.
Frame
2
Bottom surface of the upper looper guide support
Apply the sealant to the bottom surface of the upper looper guide support
frame surface.
3
After assembling the front edge of the upper looper guide support
the gap of the contact surface between the frame and the upper looper guide support (
in the illustration).
Be careful not to allow the
sealant to run to the rear.
Apply only to the right setscrew
Apply the sealant to the
bottom surface.
Model
MO-6704D -
MO-6705D -
MO-6704D - 0E4
0F6
MO-6712D -D
MO-6714D -
MO-6716D -
MO-6716D -DE
MO-6743D -
(JUKI seal)
(Three-bond 1104)
– 41 –
(Unit : mm)
Center-to-center
distance
-
- 0
40H
50H
-
-
- 0
4 H
to FF -
5 H
- 40H
, which contacts with the
(JUKI seal), apply the sealant to
Apply the sealant to the
bottom surface.
H
38
39
39
39
38
39
39
section