Adjusting The Height Of The Feed Dog; Adjusting The Tilt Of The Feed Dog - JUKI MO-6700D Series Manual

(11) Adjusting the height of the feed dog

The height of main feed dog
highest position.
Needle
entry
[Standard]
Auxiliary feed dog
B = 0.5 mm
[30P]
Auxiliary feed dog
B = 0 mm

(12) Adjusting the tilt of the feed dog

Tilt of the feed dogs when
the feed dogs have come
up most.
Needle
A
entry
Model
MO-6700D series (30P excluded)
MO-67 D-
Standard Adjustment
from the top surface of the throat plate
A
is 0.5 mm lower than main feed dog
is as high as main feed dog
B
Standard Adjustment
When the feed dog juts
out the top surface of
the throat plate
Top surface of
B
the throat plate
Front up
Dimension A Dimension B
1.0
-30P 0.8
should be as follows when it is at its
Model
MO-6700D series (30P excluded)
MO-67 D-
.
.
Feed dog is leveled.
(Unit : mm)
(1.2)
(0.9)
– 20 –
(Unit : mm)
Dimension A
1.0
-30P 0.8
In case of 30P type
15 °