Section 700 - Operation
Last Number Redial
Description
Last Number Redial allows you to automatically redial the last number dialed by pressing the
REDIAL key.
Operation
To automatically redial the last number dialed:
1. Lift the handset or press the ON/OFF key.
OR...
Press a vacant CO/Exchange line key or enter a exchange
line access code.
2. Press the REDIAL key.
3. Complete the call and replace the handset or press the ON/
OFF key.
Considerations
•
Extension Class of Service (COS) determines whether Last Number Redial can be used for both
intercom and CO/Exchange line calls or CO/Exchange line calls only.
Line Appearances
Description
The System provides three types of line appearances
•
Direct Station Select (DSS) / Busy Lamp Field (BLF) Appearances
•
Direct Line (DL) Appearances
•
MCO Line Appearance
DSS/BLF Appearances
When a DSS/BLF key is programmed, it automatically provides one-touch dialing and DSS and BLF
for the assigned extension numbers. If desired, the DSS/BLF key can also provide ring or delayed ring
monitor. For example, you can set extension A as a DSS/BLF ringing key on extension B. When
extension A rings, the LED of the DSS/BLF key on extension B flashes and the phone rings.
Ringing or delayed ringing can be set on extensions which have a BLF key. The LED of the DSS/BLF
key flashes green during ringing and the display shows the BLF extension number.
When extension A is in use, the LED of the DSS/BLF key on extension B lights red. If one extension
has the Call Forwarding or Do-Not-Disturb (DND) feature activated, the DSS/BLF key lights green.
ICX-40-700
Action
ICX (International) issued December 1999
Chapter 5. Key Telephone Features
Result
• Outside dial tone
• CO XXX displays (where XXX =
exchange line number)
Last number dialed displays
Line key LED turns red, then goes off.
5-55