Panasonic S-ICX Technical Manual page 73

Section 700 - Operation
9. Enter the stop date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FL/R
key.
10. Press the HOLD key.
11. To set additional Exception Day modes, press the volume
up or down key or press the HOLD key to move to the
desired mode.
12. Repeat steps 7-11 until all Exception Day modes are set.
(Up to 6 exception periods may be specified.)
Note: The entry positions are listed in Table 4-2 on page 4-
11.
13. Press the MEMORY key to exit the entry mode.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Table 4-2. Exception Days
EXCEPTION DAYS:
200=Start - Exception Day 1
201=End - "
202=Start - Exception Day 2
203=End - "
204=Start - Exception Day 3
205=End - "
206=Start - Exception Day 4
207=End - "
208=Start - Exception Day 5
209=End - "
210=Start - Exception Day 6
211=End - "
ICX-40-700
Action
8107-2 (200-211)
"
"
"
"
"
"
ICX (International) issued December 1999
Next Exception Day mode displays
Desired Exception Day mode displays
2-
Mode Except Day displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Hold (MMDD) Hold
Month/Day of Exception Days
(Start or End)
Chapter 4. User Maintenance
Result
4-11