Teledyne 2105 Installation And Operation Manual page 94

2105 Interface Module
Appendix C Material Safety Data Sheets
Section 1 – Product and Company Information
Product Name:
Product Use:
Grades:
Synonyms:
Company;
Street Address:
City, State, Zip, Country:
Telephone Number:
Fax Number:
Website / E-Mail :
Section 2 – Composition / Information on Ingredients
Component Name
Synthetic amorphous silica gel (SiO
Phenolphthalein
While this material is not classified, this MSDS contains valuable information critical to the safe handling
and proper use of this product. This MSDS should be retained and available for employees and other users
of this product.
Section 3 – Hazard Identification
Emergency Overview:
Potential Health Effects:
Eyes:
Skin:
Ingestion:
Inhalation: Slight irritation is possible but none is expected.
Medical Effects Generally Aggravated by Exposure:
Chronic Effects/Carcinogenity:
C-2
MATERIAL SAFETY DATA SHEET
Silica gel, indicating, yellow
Desiccant, absorbent
Silica gel, indicating
Amorphous silica gel, SiO
Multisorb Technologies, Inc.
325 Harlem Road
Buffalo, NY 14224-1893 USA
(716) 824 8900 [USA] Monday - Friday (8:00 - 5:00 EDT)
(716) 824 4091 [USA]
multisorb.com
)
2
A yellow bead or granular material that poses little or no immediate hazard.
This material is not combustible.
Dust and or product may cause eye discomfort and irritation seen as tearing and reddening.
The product dust may cause drying of the skin. Silica gel may get hot enough to burn skin
when it adsorbs moisture rapidly. Use an excess of water to cool the silica gel.
Material is not toxic and will pass through the body normally.
May cause eye, skin and mucous membrane irritation and drying.
March 8, 2005
Effective Date
M163
MSDS Number
, silicon dioxide (amorphous)
2
CAS Number % by Weight
112926-00-8 100
77-09-08 100 ppm
Respiratory ailments.