Teledyne 2105 Installation And Operation Manual page 103

DECLARATION OF CONFORMITY
Application of Council Directives*:
Manufacturer's Address:
Equipment Type/Environment:
Trade Name/Model No:
Standards to which Conformity is Declared:
Standard
EN 61000-4-2:2009 Electrostatic Discharge
EN 61000-4-3:2006 Radiated RF Immunity
/A1:200 /A2:2010
EN 61000-4-4:2004 Electrical Fast Transient (EFT)
/A1:2010 on Mains and I/O
EN 61000-4-6:2008 Conducted RF on Mains and
I/O lines
CISPR11/ RF Emissions Radiated, below
EN 55011:2009 1 Ghz and Conducted, AC
Mains
* Low Voltage Directive not applicable
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of July 25, 2013.
USA Representative
Vikas V. Padhye Ph. D.
Vice President and Product General Manager
Teledyne Isco
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0239
Fax: (402) 464-0318
60-2002-675
Rev A
2004/108/EC – The EMC Directive
2012/19/EC– The WEEE Directive
Manufacturer's Name: Teledyne Isco
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
2105Gi
Year of Issue: 2013
EN 61326-1:2006 EMC Requirements for Electrical Equipment for
Description
Measurement, Control, and Laboratory Use
Severity Applied
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
10V/m, 80 MHz to 1GHz 80% AM at 1kHz
3V/m, 1.4GHz to 12GHz 80% AM at 1kHz
1V/m, 2 GHz to 2.7GHz 80% AM at 1kHz
Level 2 – 1kV on AC lines
150 kHz to 80 MHz,
3V rms, 80% modulated
Group 1, Class A Industrial, Scientific, and
Medical Equipment
Performance Criteria
A
A
A
A
A
A
PASS