Teledyne 2105 Installation And Operation Manual page 36

2105 Interface Module
Section 2 Installation and Operation
2-16
3. In the Phone Number list box, type the contact telephone
numbers. These must be valid SMS phone numbers. You
must enter at least one number; you can enter as many as
five. When an alarm condition is triggered, the system will
try dialing each number in the list.
4. You must enter a message to be sent to the phone. In the field
type the outgoing text message (maximum
labeled Message,
of 32 characters).
5. Under "Alarm condition," select the retry number and
interval, and define the alarm condition using the Equa-
tion Builder. Defined alarm conditions will appear on the
pull-down list.
6. Click the Apply button or press F9 when you are done, to
update the module's settings.