Digital-In
The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted,
the position can be adjusted by selecting either SIZE1 or SIZE2.
Press the M
To DIGITAL-IN
π †
è
To select SIZE1 or SIZE2
Press the M
Digital-In Audio
This feature is used if you have a DTV or HDMI compatible component connected to your TV.
Press the M
To DIGITAL-IN AUDIO
π †
è
To select ANALOG or DIGITAL
Press the Menu button when fi nished
Notes:
• If your DTV or HDMI component is capable of digital
audio and video, choose DIGITAL. If your DTV or
HDMI component is capable of analog audio and
digital video, choose ANALOG.
• Refer to your DTV or HDMI component's instruction manual for more information.
• When you select DIGITAL, select PCM on Digital Sound in the Digital Setup menu. See page
72.
button
ENU
button to finish
ENU
button
ENU
Initial Setup
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
VIDEO-1 MONITOR OUT
NEXT PAGE
SELECT
OPERATE
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
VIDEO-1 MONITOR OUT
NEXT PAGE
SELECT
OPERATE
SIZE1
DIGITAL
ON
OFF
(1/5)
EXIT
MENU
SIZE1
DIGITAL
ON
OFF
(1/5)
EXIT
MENU
53