Center Ch Input; Video-1 Monitor Out - JVC I'Art Pro AV-48P775 User Manual

Initial Setup

Center CH Input

When you are using a surround system, you can substitute the speaker of this television for
the center speaker of your surround system. Set CENTER CH INPUT to ON when you use the
speaker as the center speaker of your surround system. The volume differs when the TV is
being utilized as the Center Channel Input versus when it is not.
Press the M
To CENTER CH INPUT
π †
è
To adjust CENTER CH INPUT to ON
or OFF
Press the M
Note:
• In order to use the CENTER CHANNEL SPEAKER feature, you need a video signal present
as well as sound. Because of that we recommend using this feature for Home Theater setup
only. If there is no video signal present, the TV will be muted.
• There are two different volume adjustment levels, one for regular TV and one for TV used as
a CENTER CHANNEL. Please remember that when switching CENTER CHANNEL mode ON
and OFF in TV menu.

Video-1 Monitor Out

This function allows you to set whether the signal, which comes from VIDEO-1 input terminal,
should be output from MONITOR OUT terminal. If you select it from MONITOR OUT, set it to
"ON".
Press the M
To VIDEO-1 MONITOR OUT
π †
è
To select ON or OFF
Press the M
54
button
ENU
button when finished
ENU
button
ENU
button to finish
ENU
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
VIDEO-1 MONITOR OUT
NEXT PAGE
SELECT OPERATE
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
VIDEO-1 MONITOR OUT
NEXT PAGE
SELECT OPERATE
SIZE1
DIGITAL
ON
OFF
(1/5)
EXIT
MENU
SIZE1
DIGITAL
ON
OFF
(1/5)
EXIT
MENU