Selecting The Active Port; Auto Scan Mode - ATEN CS-82A User Manual

CS-82A Hotkey Operation
The CS-82A provides the following Hotkey Port Selection
features:

Selecting the active port

Auto Scan Mode

Selecting the Active Port
The default method to toggle the KVM focus between the two
ports from the keyboard is to tap the left or right Ctrl key twice:
[Ctrl] [Ctrl]
Note: The combination must be on the same side (both left or
both right).
If the Ctrl key combination conflicts with programs running on
your computer, you can switch the hotkey to the Scroll Lock key
by pressing and holding both the CS-82A's Port Selection
Pushbuttons for three seconds. After this, tap the Scroll Lock key
twice to toggle the KVM focus.
[Scroll Lock] [Scroll Lock]
Note: To switch back to the default hotkey, press and hold
both the Port Selection Pushbuttons for three seconds
again.
Auto Scan Mode
The CS-82A's Auto Scan feature automatically cycles the KVM
focus through the two/four computers at regular five second
intervals so that you can monitor their activity without switching
from port to port manually. To invoke Auto Scan Mode, do the
following:
1. Press and release [Left Shift].
2. Press and release [Right Shift].
- 13 -