Operation; Selecting The Active Port - ATEN CS-62B User Manual

Operation

Accessing both of your computers from a single console could
not be easier. The CS-62B uses Hotkey combinations to
provide KVM focus to the computers. Entering Hotkey
combinations requires pressing keys on the keyboard in a
specified order, which performs a function on the KVM switch.
The Hotkey combinations allow you to:
M Select Alternative Hotkeys
M Select the Active Port
M Invoke Auto Scan Mode
M Set the Auto Scan Time Interval
M Individually Toggle the KVM and Audio Focus
Alternative Hotkey Selection
The default Hotkey is: [Scroll Lock] [Scroll Lock]
The alternative Hotkey is: [Ctrl] [Ctrl]
Enter the following Hotkeys to use the alternative Hotkey:
[Scroll Lock] [Scroll Lock] [x] [Enter]
Note: 1. Brackets indicate keys you should press. For
example, [Enter] means to press the Enter key.
2. Press and release keys one at a time.
3. Alphabetical keys may be entered as either
uppercase or lowercase.

Selecting the Active Port

To toggle the KVM focus between the two computers, enter the
following Hotkey combination:
[Scroll Lock] [Scroll Lock] [Enter]
- 7 -
2005-10-11