21.
[ACCESS] button
Use this button when the department code or user
information has been set. If this button is pressed after
copying, etc., the next user cannot use functions such as
copying without keying in the department code or user
information. Refer to the MFP Management Guide for the
department and user management.
22.
Digital keys
Use these keys to enter any numbers such as the number
of copies, telephone numbers or passwords.
Adjusting the angle of the control panel
The angle of the control panel is adjustable at any angle between 7 and 8 degrees from the horizontal position.
When changing the angle of the control panel, be careful not to catch your hands in the gap between the equipment and
the control panel.
This could injure you.
Description of Each Component
23.
Touch panel
Use this panel for the various settings of the copying,
scanning and Fax functions. This panel also indicates the
status of the equipment, such as when you run out of
paper or there is a paper jam.
1
2
3
4
5
7