Inserting The Modules On The Printer - ABB HTP500 User Manual

6.2 INSERTING THE MODULES ON THE PRINTER

1) Place a plate on the feeding table and align the edge with the cleaning brush.
Item to
Print ON

Printing on a plate that has burrs on its edges can cause printing problems and can damage the print
head. Also, metallic particles adhering to a plate can damage the print head, so handle and store plates
carefully. Damage to the print head caused by printing on dirty plates is not covered under the warranty.

Printing on plates that have dirt or grease (including skin oils) on the surface will result in poor print
quality

When aligning the width guides with the width of the plate, align the leading edge of the plate with the
cleaner brush. If you push the leading edge of the plate into the feed opening, the printer Automatically
takes up the plate and positions it for printing
2) Adjust the width guides to the plate sides.
Plate edge
Guides well aligned
with the Plate
NOTICE
Auxiliary tray