Print On Terminal Block Tags Tb Series; Prints Of Pvc Tags And Methacrylate Tags In "None" And "Acryl Mode; Preparing The Printer - ABB HTP500 User Manual

And afterwards the following message
PRINT READY..
SINGLE SBLACK
Bring the "Support Plate TB" with a module of T-Block tags positioned on and insert it
carefully till the printer makes a beep.
The printer detects the "Support Plate TB" and moves it in the correct HOME position ready
for the print.
"Support Plate TB"
When the
minutes, the printer Automatically moves the
Be sure that the ONLINE light is turned on and that HTP500 V2 is in ONLINE mode.

5.4 PRINT ON TERMINAL BLOCK TAGS TB SERIES

Run the printing from software HTS500.
Press push Button New Job.
Select the Item to Print MC512.
Press the Button New from the Generator Window.
Insert the data to print.
Press push button Confirm.
Press push button Close.
Press push button Run.
Press push button Print.
Press push button of the Device/Printer Terminal Blocks.
6 - PRINTS OF PVC TAGS and METHACRYLATE TAGS in "NONE" and
"ACRYL Mode"
This explain how to print in manual modality the tags and strips with HTP500 V2 easily and
quickly.
All needs to be done is to position correctly the items to be printed on the printer following
carefully the instructions here follow.

6.1 Preparing the printer

6.2 Inserting the Modules in the Printer
6.3 Turning on the Printer
6.4 Print on tags and strips
6.1 PREPARING THE PRINTER
To load an item perform the steps shown below.
Open the tray pulling the auxiliary tray as shown in the picture below.
REMIND
is in the correct HOME position, if you don't print with the PC in 5
"Support Plate TB"
from the home position.