Table of Contents
Advertisement
M - 11 ANCHOR STORAGE LOCKER
The anchor line is stored in a compartment, below the
anchor locker. The compartment keeps the line secure,
and free from fouling while also keeping the deck clear.
A deck plate is included for access to the anchor line
compartment. Also contained inside the anchor locker
is the windlass. Please see Section M-12 below for de-
tails regarding the windlass. Refer to Figures M12 &
M13.
Figure M12: Anchor Storage Lid
M - 12 WINDLASS
A windlass is an electrically controlled winch mechanism
for retrieving the anchor. The mechanical winch portion is
mounted inside the anchor locker, at the bow. See Fig-
ures M12, M13 and M14. The windlass can be controlled
by a set of foot pads (electrical switches) mounted on the
foredeck or it can be operated from the helm. A circuit
breaker on the battery switch is provided to protect the
windlass from possible overload situation. The windlass
is standard on the 378. Along with the windlass comes
a 35-pound Talon Plow XT™ anchor and 200 feet of 5/8"
rope and chain. Refer to the manufacturer's literature
included in the owner's packet.
378 Vista™ Owner's Manual
™
378
Deck Access Plate
Figure M13: Windlass
Figure M14: Windlass Foot Switches
To prevent personal injury, keep clear of the wind-
lass at all times.
Always be sure to raise and secure the an-
chor prior to operating your boat. Failure
to raise and secure anchor before getting un-
derway could result in severe injury or damage
to boat from rebounding anchor.
Windlass
Chain Stop
Section M
Page 6
Advertisement
Table of Contents
