Strata Airlink Wireless System - Toshiba Strata DK14 General Description Manual

Strata AirLink Wireless System

The Strata AirLink Wireless Telephone system that is configured to standard ports of the Strata
DK and many non-Toshiba telephone systems has software that enables a System Administrator or
technician to quickly diagnose error messages, alarms, and traffic conditions by viewing a PC
monitor before troubleshooting the hardware.
The Status Window, displayed by the Strata AirLink Manager software, is an active window in
which viewing reports, querying the software, and rebooting the Base Station Interface Adapter
(BSIA) is possible. Some of the available reports are:
Base Station channels status
Line status
Call status
Critical alarms
The software also creates log files and sends error messages to the PC monitor to assist the
technician in making corrections. The log files are easily opened in any text editor for viewing and
have information about the BSIA boot software, Base Station upgrades, software queries, errors,
and alarms.
RWIU Wireless System
The Strata AirLink Wireless Telephone system that is configured to Strata DK telephone systems
using its own proprietary RWIU PCB also has software that enables a System Administrator or
technician to:
Set system IDs and enter handset IDs
Set the time and date, and change passwords
Enable UTAM
Change communication ports
Check the software version of the RWIU and Base Stations
View log messages
Reset and upgrade Base Stations and the RWIU
Change Base Station numbers
LEDs and BER Testing
There are several LEDs on each Base Station, BSIA, and the RWIU that indicate normal, boot up,
and alarm conditions. Signal fading and attenuation can be checked using the resident Bit Error
Rate (BER) test in each handset for additional troubleshooting and maintenance routines.
Strata DK General Description 5/99
Strata DK424
Strata AirLink Wireless System
33