Canon imageRUNNER 2530 Service Manual page 311

8) Hold the drum unit as shown in the figure. Pull up the unit a little and
draw it out completely.
10) Detach 1 connector and draw the developing unit out.
x1
9
Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
9) Remove the 2 screws and release the claw to detach the toner replenish cover.
Claw
F-9-171
11) Dismount the harness from the developing stay and remove 2 screws to detach the developing stay. (Removed developing stay is
no longer used.)
F-9-173
9 Installation > Drum Heater-C1 Installation Procedure > Installation Procedure
x2
9-75
x2
x1
F-9-172
F-9-174
9-75