Selecting Wep Security Mode - Toshiba GN-1060 Operator's Manual

1 SETTING UP WIRELESS NETWORK
 Selecting WEP security mode
The WEP is a data encryption method using the WEP key between the Access Point and other wireless
devices. Compared with WPA/WPA2/802.1X and WPAPSK/WPA2PSK, the WEP is less security. If the
wireless network is configured in the Infrastructure Mode and the Access Point supports WPA/WPA2/802.1X
or WPAPSK/WPA2PSK, it is recommended to use WPA/WPA2/802.1X or WPAPSK/WPA2PSK rather than
WEP.
1 Press [WEP] button and press [NEXT].
The WIRELESS ENCRYPTION - WEP screen is displayed.
Enter the following items and press [NEXT].
2
 WEP ENCRYPTION
Select the bit length of the WEP key.
 KEY FORMAT
Select the character code for the WEP key.
 WEP KEY
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and Key Entry Method.
64 bit
HEX:
ASCII:
When pressing [WEP], the letter entry screen is displayed. Enter the value using the keyboard and
digital keys, and press [OK] to set the entry.
28 Setting Up the Infrastructure Mode
128 bit 152 bit
10 26
5 13
32
16