Specify Ssid; Selecting The Ssid From The Available Network List - Toshiba GN-1060 Operator's Manual

1 SETTING UP WIRELESS NETWORK
 Specify SSID
When you select the Infrastructure Mode for the network type, you can specify the SSID by selecting the
available network list or manually entering the SSID.
 P.16 "Selecting the SSID from the available network list"
 P.17 "Entering the SSID manually"
If you are not sure how the SSID must be specified, see the following section to determine the SSID.
 P.11 "Determine the SSID"
 Selecting the SSID from the available network list
This equipment can search the available SSID automatically from the wireless network. Then you can select
the SSID from the list.
Press [AVAILABLE NETWORK].
1
The AVAILABLE NETWORK screen is displayed.
Select the SSID that this equipment will connect and press [OK].
2
The screen returns to the SSID SETTINGS screen.
 The available network may not be displayed according to the communication environmental
conditions.
 If the desired SSID is not displayed, please specify the SSID manually.
 P.17 "Entering the SSID manually"
 This Wireless LAN supports only channel 1 to 11. This equipment cannot connect the Access
Point that uses the other channel than these channels. Please make sure to set the channel
between 1 to 11 in the Access Point.
16 Setting Up the Infrastructure Mode