Selecting Wpa/Wpa2/802.1X Security Mode With Peap Protocol - Toshiba GN-1060 Operator's Manual

1.SETTING UP WIRELESS NETWORK
 Selecting WPA/WPA2/802.1X security mode with PEAP protocol
Using the WPA/WPA2/802.1X with the PEAP protocol, you must install the CA certification file in the
equipment. This equipment uses the user name and password to authenticate the access rights to the
wireless network, and the RADIUS server authenticate this equipment using the CA certification file.
When using the WPA/WPA2/802.1X with the PEAP protocol, you must install the CA certification file in the
equipment using TopAccess first. For instructions on how to install the CA certification using TopAccess,
refer to TopAccess Guide.
1 Press [WPA], [WPA2] or [802.1X], and then [NEXT].
The AUTHENTICATION SETTINGS screen is displayed.
To select [TKIP] or [AES (CCMP)], press [WPA] or [WPA2], or to select [DYNAMIC WEP], press
[802.1X].
2 Press [PEAP] and press [NEXT].
The WIRELESS AUTHENTICATION (PEAP) screen is displayed.
1 SETTING UP WIRELESS NETWORK
Setting Up the Infrastructure Mode 23